Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, pa…
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect fo…
This is a joystick thumb pad very similar to the thumb pads on PlayStation controllers.
It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up w…
This is a mountable SPDT slide switch --- great for use as a general control switch. The pins are spaced by 3.7mm (0.14"), ma…
This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rock…
Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to…
This is a translucent silicon rubber button pad with 16 buttons, the same found in our Simon Soldering Kits.
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects!
It's your basic black action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the t…
This is a simple knob that connects to the small and medium sized linear slide potentiometers.
This is a 3-terminal microswitch two pack, each equipped with a 20mm offset lever actuator. These switches have a great 'clic…
This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at [monome.org](http://monome.…
This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for …
This is a small device called a [reed switch](http://en.wikipedia.org/wiki/Reed_switch). When the device is exposed to a magn…
The SparkFun Qwiic Button Breakout simplifies all of those nasty worries away into an easy to use I2C device, and with our Qw…
This a simple breakout PCB for our [4x4 silicone button pads](https://www.sparkfun.com/products/7835). Each LED and button ca…
This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up blu…
This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up gre…
Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the us…
A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep…
It's your basic red action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the thr…
Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm …
Although small in size, this roller microswitch is rated for controlling electrical loads ranging from logic level to power d…
DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard! Works great as gener…
This Translucent MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but can be used …
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! …
Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to t…
This is an SMD 6mm square SPST button. What we really like is the little button head and good tactile feel (it ‘clicks’ r…
These are the sturdy little stomp switches that you find on guitar effects pedals. They’re 3PDT (three-pole, double-throw) …
This Translucent Black Cherry MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but…
The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactl…
It's your basic white action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the t…
This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. **Note:** Po…
This is an SMD 12mm square SPST button. What we really like is the large button head and good tactile feel (it ‘clicks’ r…
This Black Cherry MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but can be used…
This IR proximity contactless button makes for a good replacement for typical push buttons
The Loomia Single Backlit Button is a simple mechanical switch that comes with an LED inside.
This a simple breakout PCB for our [2x2 silicone button pads](https://www.sparkfun.com/products/7836). Each LED and button is…
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5…
The Double Backlit user interface is like the Single Backlit Button, but twice the fun!
This is a 3-terminal microswitch, with a small push-button. This switch has a great 'clicky' sound to it, and a nice tactile …
This is a simple knob that connects to the extra large sized linear slide potentiometer.
