Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is an simple 3' long Micro-HDMI to HDMI cable. Nothing fancy, it just works!
Pi Zero Micro USB to USB A is a really useful USB specification! It allows some small devices that would normally be unable t…
This is a basic baseplate for the Raspberry Pi 3 B+. The baseplate is designed for the RPi to remain on the attached via fric…
They said it couldn't be done, and perhaps we shouldn't have, but we just couldn't resist... The MicroMod Big Display enab…
The Flirc Raspberry Pi Zero case has an aluminium casing with a core heatsink and smooth top, offering silent, passive and ef…
The BeagleBone Blue is the affordable and complete robotics controller built around the popular BeagleBone open hardware comp…
The Argon ONE M.2 case features an M.2 interface for using M.2 (Key-B or Key-B&M) SATA solid state drives (not included).
This black, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load.
The SparkFun gator:UV micro:bit Accessory Board is an ultraviolet sensing solution created to interface with the micro:bit as…
The pi-topCEED is a DIY desktop computer that helps you start learning how to code, create awesome devices and take your know…
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it…
The Pi Zero USB Stem is a PCB kit that turns a Raspberry Pi Zero into a USB dongle.
This is an inexpensive 3-foot-long HDMI to Mini HDMI cable that you can use to hook up your Raspberry Pi Zero W to a suitable…
The is the official, 1m, micro HDMI to HDMI Cable for use with the Raspberry Pi.
The Mountable MI:pro is a simple and compact protective case for the micro:bit.
The SparkFun gator:bit is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional deve…
The Sense HAT is an add-on board for Raspberry Pi with an 8×8 RGB LED matrix, a five-button joystick and a number of sensors…
The official case for the Raspberry Pi 4 from Raspberry Pi!
The IQaudio Codec Zero delivers bi-directional digital audio signals between Raspberry Pi Zero and its onboard Dialog Semicon…
**Note:** This camera case does not currently fit the [Raspberry Pi Camera Module V2](https://www.sparkfun.com/products/14028…
This is a USB Type-C Power Supply that is compatible with the Raspberry Pi 4.
The MI:power board adds portability to your project. A buzzer and 3V coin cell holder is connected to the 3V, GND and P0 conn…
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates a microphone into SparkFun's gator:bit series of…
This adaptor allows you to power your RPi 4 with a previous usb-micro B power supply.
This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants.
Feeling Fancy? The SparkFun Top pHAT is the fundamental machine learning add-on for Raspberry Pi or any 2x20 GPIO SBC!
With Single-Board Computers (SBCs) on the rise, it is a good idea to have an easy way to interface with them. Operating on a …
The gator:RTC is a supplemental data logging tool with a RV-3028 real time clock (RTC) module from Micro Crystal, using a con…
The micro:bit Edge Connector - SMD, Right Angle (40-pin) allows you to expand the capabilities of the BBC micro:bit.
The pi-top is a DIY laptop you build yourself that helps you start learning how to code, create awesome devices and take your…
The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way.
This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cabl…
This the IQAudio XLR interface board from Raspberry Pi. This board is perfect for those wanting to work with peripheral with …
The Pi Adaptor connects to the Raspberry Pi’s 40 pin interface, breaking out selected pins for use with the MatesBUS.
This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better th…
The Raspberry Pi is THE new favorite of development platforms, so the last thing that you’d want is for something bad to ha…
Pirate Audio Speaker is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console!
The Argon40 Fan HAT for the Raspberry Pi Model B boards is a great way to cool your board during more intensive applications.
The gator:color ProtoSnap is perfect if you want to add a low-profile glowing component to your project.
A preposterous pile of peripherals on your Pi! The pHAT Stack - Fully Assembled Kit by Pimoroni is the ultimate way to add HA…
Build your own home-brew iPod Nano with Pirate Audio Headphone Amp!
Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi!
This is the official case for the Raspberry Pi 3 Model A+ (it also fits the Raspberry Pi 1 Model A+ as well).
The gator:starter ProtoSnap has been designed to provide you with a staring point to go beyond the capabilities of the SparkF…
This purple, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load.
This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon ca…
